Features
- 2.4-GHz RF Transceiver Compatible With Bluetooth Low Energy (BLE) 5.1
- Supports up to three BLE connections
- Typical cold boot to radio active 35 ms
- 16 MHz 32-bit ARM® Cortex-M0+ with SWD interface
- Dedicated Link Layer Processor
- AES-128 Encryption Processor
- 32 kB One-Time-Programmable (OTP)
- 48 kB Retainable System RAM
- 144 kB ROM
- Clock-less hibernation mode: 270 nA
- 10-bit ADC for battery voltage monitoring
- Built-in temperature sensor for die temperature monitoring
- TX: 3.5 mA, RX: 2.2 mA (system currents with DC-DC, VBAT_HIGH = 3V and 0 dBm)
- Programmable transmit output power from -19.5 dBm to +2.5 dBm
- -94 dBm receiver sensitivity
- Support SPI, UART, I²C interface
- Support the OTA upgrade (Requires external SPI Flash or EEPROM)
- Operating Voltage: 1.1V to 3.6V
- Operating Temperature: -40°C to +85°C
Applications
- Medical applications
- Beacons
- Proximity tags and trackers
- Wearable devices
- Low power consumption devices
- Industrial appliances
Specifications
| Categories | Features | Implementation |
|---|---|---|
| Wireless Specification | Chipset | DA14531 |
| Bluetooth Version | BLE 5.1 | |
| Frequency | 2.400 ~ 2.483.5 GHz | |
| Transmit Power | -19.5 ~ +2.5 dBm | |
| Receive Sensitivity | -94 dBm (Typ.) | |
| Modulation | GFSK | |
| Host Interface and Peripherals | UART | TX, RX |
| General Purpose I/O | ||
| Default 115200, N, 8, 1 | ||
| Baudrate support from 1200 to 921600 | ||
| 5, 6, 7, 8 data bit character | ||
| GPIO | 6 (maximum - configurable) lines | |
| Pull-up resistor (33 KΩ) control | ||
| Read pin-level | ||
| I²C | 2 (configurable from GPIO total), up to 400 Kbps | |
| ADC | Analog input voltage range: 0.4V ~ 1.4V (or 2.4V) based on configure | |
| Supports single 10-bit SAR ADC conversion | ||
| 2 channels (configured from GPIO total) | ||
| Up to 200 Msps conversion | ||
| PWM | 2 PWM outputs | |
| Supports edge-alignment or center-alignment Supports fault detection |
||
| Profiles | Class Bluetooth | No Support |
| Bluetooth Low Energy | GATT Client & Peripheral - Any Custom Services | |
| Maximum Connections | Supports up to three BLE connections | |
| FW upgrade | J-Link | |
| Supply Voltage | Supply | 1.1V ~ 3.6V |
| Power Consumption | 1.6 uA (Sleep) | |
| Physical | Dimensions (mm) | 5.4 × 5.8 × 1.2; Pad Pitch 0.8 |
| Environmental | Operating Temperature | -40°C ~ +85°C |
| Storage Temperature | -40°C ~ +85°C | |
| Miscellaneous | Lead Free | Lead-free and RoHS compliant |
| Warranty | One Year | |
| Humidity | 10% ~ 90% non-condensing | |
| MSL Grade | MSL 3 | |
| ESD Grade | Human Body Model | ±2000V |
| Charged Device Model | ±500V |
