In the configuration screen of the Feasycom app, I clicked on the reset device button and reset my beacon. After that, I could not use the beacon anymore. I tried to configure it again via the app, but even when I used the default password (000000), the app says that this password is incorrect.
Is there a way for me to recover the beacon?
I reset my FSC-BP108 via the Feasycom app, and now I can't enter the configuration screen anymore.
-
matheus.quadros
- Posts: 1
- Joined: Thu Oct 10, 2024 11:31 am
Re: I reset my FSC-BP108 via the Feasycom app, and now I can't enter the configuration screen anymore.
Hello!
This issue may be caused by the beacon not exiting production mode after resetting.
You could send them an over the air command: AT+CFG=1, which might solve your problem.
Here are the detailed steps on how to use the air command:
https://document.feasycom.com/docs/app/ ... dification
The Feasyblue application can be downloaded from the Google Store
We hope these steps will help you resolve the issue. If you have any further questions or need further support, please feel free to contact us.
This issue may be caused by the beacon not exiting production mode after resetting.
You could send them an over the air command: AT+CFG=1, which might solve your problem.
Here are the detailed steps on how to use the air command:
https://document.feasycom.com/docs/app/ ... dification
The Feasyblue application can be downloaded from the Google Store
We hope these steps will help you resolve the issue. If you have any further questions or need further support, please feel free to contact us.